Northstone Logo

Galloway

Galloway main image
  • Galloway image 1
  • Galloway image 2
  • Galloway image 3
  • Galloway image 4

Thin, leading edge tile with the appearance of slate, this durable, attractive design is 40% thinner and 15% lighter than traditional flat tiles, offering real cost and fitting benefits. Easy to fix with no special fittings or top and eave course required.

  • Contact Button
  • Request a Brochure Button
  • Call Back Button
  • E-Mail a Fiend Button

The plain finish tile is available in Basalt Grey or Matt Black. Galloway tiles are compatible with the full range of Scott dry fix and ventilation products.

Technical Data

  • Designation: EN490-IL-0-RF-300x384-5.4
  • Maximum Pitch: 54º (without special fixing)
  • Minimum Pitch: 22.5º
  • Minimum Headlap: 100mm
  • Maximum Gauge: 319mm
  • Size of Tile (Overall): 419mmx334mm
  • Leading Edge Depth 17mm
  • Hanging Length: 399mm
  • Nominal Cover Width: 303mm
  • Tile Weight: 4.60 kg
  • Profile Depth: 0
  • Nail Hole Diameter: 5-8mm
  • Nail Hole Position: 35mm from top of tile-inset
  • 60mm from each side
  • Weight of Tiling (approx): Headlap 100mm
  • Tiles/M2 48.3kg/m2
  • Net Batten Length Headlap 100mm
  • Length/M2 3.2m
  • Recommended Batten Size: Minimum 38mmx25mm for rafters not exceeding 400mm span. 50mmx25mm for rafters not exceeding 600mm. Battens to be secured with round wire or cut wire nails conforming to BS 5534

Eave: Standard Tile
Verge:

  • Right hand: standard tile and special half tiles in alternate courses
  • Left hand: left hand verge tile and special half tile in Alternate courses

Dry Verge: Scott TLE Rooverge available in uPVC interlocking units
Left and right hand with stop end eaves units and RidgeCapping.
Undercloak: 150mm wide fibre reinforced cement strip.


Minimum fixing: 22.5º -54º all tiles clipped or nailed in Accordance with BS 5534


*Specification: The above specifications are minimum requirements. Additional Fixing may be required in accordance with BS5534. Refer to Fixing Specification brochure or contact Scott Technical dept.for further information.

  • Valley: Open Metal Valley
  • Abutment: Cover flashing, secret gutter
  • Ridge (Wet Fix): Universal Ridge butt jointed 455mm long
  • Ridge (Dry Fix): Scott Roovent Dry Ridge System
  • Hip (Wet Fix): Angle Hip Ridge but jointed 455mm long
  • Hip (Dry Fix): Scott Dry Hip System.
  • Mono Ridge: Universal type butt jointed 455mm long.

The colours and textures displayed on this website are as accurate as can be reproduced. We recommend referring to samples (available on request)

Web design and web development by Tibus Northern Ireland