Centurion
Traditional Concrete Tile designed for low pitch roofs down to 12.5º . There may be some instances where this tile could be laid down to 10º . Please consult our Sales/ Technical staff before specifying to the lower pitch.
Technical Data
- Maximum Pitch: 44 º without special fixing)
- Minimum Pitch: 10 º (on advice from Technical Dept)
- Minimum Headlap: 100mm
- Maximum Gauge: 285mm
- Size of Tile (Overall): 385mmx230mm
- Nominal Cover Width: 230mm
- Tile Weight: 2.7 kg
- Profile Depth: 40mm
- Weight of Tiling (approx): Headlap 100mm
- Tiles/m 47kg
- Net Batten Length: Headlap 100mm
- Length/M2 3.5m
- Recommended Batten Size: Minimum 38mmx25mm for rafters not exceeding 600mm span. Battens to be secured with round wire or cut wire nails conforming to BS 5534
- Eaves: Standard Tile
- Verge: Right hand-standard tile
- Left hand verge
- Undercloak: 150mm wide fibre reinforced cement strip.
- Minimum fixing: 10 º -44º all tiles clipped in accordance with BS 5534
- Specification: The above specifications are minimum requirements. Additional Fixing may be required in accordance with BS5534. Refer to Fixing Specification brochure or contact Scott Technical dept. for further information.
- Valley: Open Metal Valley
- Abutment: Cover flashing, secret gutter
- Ridge (Wet Fix): Half Round Ridge butt jointed 455mm long
- Hip (Wet Fix): Third round Ridge but jointed 455mm long
- Mono Ridge: Universal type butt jointed 455mm long.
The colours and textures displayed on this website are as accurate as can be reproduced. We recommend referring to samples (available on request)
